TWS600 fluid end
100% interchangeable with SPM/SERVA made TWS600/TWS600S fluid end.
TianyuMfg made TWS600 fluid end is 100% compatible with the dominant TWS600 pumps in the worldwide market. It has two materials, alloy steel, and stainless steel, at your choice.
TianyuMfg manufactures a complete range of plunger sizes of TWS600 fluid ends, including 2 1/2”, 2 3/4”, 3”, 3 1/2”, 4”, 4 1/2” to meet your specific requirement on the pressure and flow ratings.
TWS600 fluid end bare blocks and fully dressed fluid ends are both available in a wide range of plunger sizes.
| PLUNGER DIAMETER | * FLUID DISPLACEMENT | |||||
| INCHES/(MM) | PER TACH DRIVE REVOLUTION @ 95% V.E. | PER TACH DRIVE REVOLUTION @ 100% V.E. | ||||
| GPR | BPR | LPR | GPR | BPR | LPR | |
| 2½” (63.5) | 0.0726 | 0.00177 | 0.2747 | 0.0764 | 0.00187 | 0.2892 |
| 2¾” (69.9) | 0.0879 | 0.00209 | 0.3328 | 0.0926 | 0.0022 | 0.3504 |
| 3” (76.2) | 0.1047 | 0.00249 | 0.3961 | 0.1102 | 0.00262 | 0.417 |
| 3½” (88.9) | 0.1424 | 0.00339 | 0.5391 | 0.1499 | 0.00357 | 0.5675 |
| 4” (101.6) | 0.186 | 0.00443 | 0.7042 | 0.1958 | 0.00466 | 0.7413 |
| 4½” (114.3) | 0.2355 | 0.00561 | 0.8912 | 0.2479 | 0.0059 | 0.9382 |
All TianyuMfg made triplex 600 spare parts are 100% interchangeable with original makes.
EN 
RU 
ES