The largest manufacturer of stainless steel fluid ends since 2004, 52″ quints and 60″ quints stainless steel fluid ends are AVAILABLE IN TEXAS WAREHOUSE. Completely compatible with most frac pump power ends.
Мы станем вашим надежным партнером в сфере поставок насосных установок для гидравлического разрыва пластов
Компания Tianyu производит широкий спектр Гидравлическая часть для
насосных установок для гидравлического разрыва пластов включая
трехплунжерные и пятиплунжерные нагнетательные части для насосов.
Мы поставляем как элементы Гидравлическая часть, так и нагнетательные
части в сборе.
Мощность насосных установок варьируется от 600 л. с. до 2500 л. с., к тому же мы предлагаем модели как из углеродистой стали, так и из нержавеющей стали 17-4ph или 15-5ph. Обратите внимание, что все нагнетательные части насосов для гидравлического разрыва пласта полностью взаимозаменяемы с оригинальными марками насосов. Наши клиенты уже более десятка лет тестируют и используют наши нагнетательные части на нефтяных месторождениях США. Нам удалось доказать, что они ничем не уступают и даже превосходят по производительности и долговечности оригинальные изделия, особенно когда речь идет про нагнетательные части из нержавеющей стали от TianyuMfg
Нагнетательные части для насосных установок для гидравлического разрыва пластов от TianyuMfg
Мы предлагаем следующие модели Гидравлическая часть:
Нагнетательная часть TWS600
насос TWS2250
Нагнетательная часть QWS1000
Нагнетательная часть QWS2500
QWS2800 Флюидная сторона
HT400&HQ2000 флюидная сторона
Y-тип квинты жидкостного конца
FMC стиль WQ2700 жидкостный конец
FMC Стиль Стиль Триплекс 2400hp жидкостный конец
JMAC СТИЛЬ 2510HP квинты жидкостный конец
GD STYLE 2500T/2500Q жидкостный конец
Стиль ГД Стиль Дауэлл PG-05 жидкостный конец
Процесс контроля качества
Сертифицированные и качественные материалы
Стоит отдельно отметить, что компания TianyuMfg использует электрошлаковый переплав, который обеспечивает чистоту металла и гарантирует создание равномерной металлографической структуры и химического состава, значительно увеличивая срок службы вашей нагнетательной части при одновременном снижении количества трещин и повреждений.
Полная проверка всех изделий
Компания TianyuMfg имеет собственный цех термической обработки с 4 печами и закалочным бассейном вместе с охлаждающей установкой и диспетчерской, чтобы гарантировать точную и качественную термическую обработку Гидравлическая часть вашего насоса.
Весь Необходимый Пакет Документов
Стоит отдельно отметить, что каждое изделие имеет уникальный номер, который позволяет отслеживать процесс производства, начиная с процесса создания заготовок. Полный пакет документов будет предоставлен после тщательной проверки перед поставкой.
Гарантия Качества
Компания TianyuMfg предлагает гарантию качества для всех моделей нагнетательного оборудования, которое мы производим. Бесплатная и быстрая замена будет обеспечена в случае любой неисправности, возникшей в течение гарантийного срока.
Свяжитесь с компанией TianyuMfg для
получения индивидуального
коммерческого
предложения
жидкие концы
Fluid end is a component use in fracking operations, all around the world. During the last century fracking industry has grown exponentially and the demand for Fluid End has also increased accordingly.
Fluid End, is one of the most essential component of a fracking apparatus. To understand what its function is, we have to first become cognizant of how the fracking process works, oil and gas is extracted from fracking by injecting a prop pant mixture into the hydrocarbon seam in the bowel of earth, under extremely high pressure. The prop pant flows into the nooks and crannies of the seam and cracks it due to its enormous pressure.
The cracks help with the extraction of hydrocarbons, which are sucked up. The component which is basically the gist of this endeavor is the fluid end. Fluid End is the component which endures the most pressure, abrasion and corrosion in the entire fracking apparatus, so it’s necessary to manufacture a Fluid End, which is robust, hard and sturdy to withstand these extreme conditions.
If you are running the oil & gas service business, this guide will be of great help to have a vast understanding of frac pump fluid end.
Which Material is Used to Manufacture a Fluid End?
Which Frac Fluid End Pump is Better Carbon Steel or Stainless Steel?
What is the Usual Life Time of a Frac Fluid End?
What is the Price of Fluid End?
How Many Times Fluid Ends for Fracking need to Be Replaced Annually?
Can You use a Frac Pump Fluid End for Coil Tubing?
What is a Triplex and Quintuplex of Fluid End Frac Pump?
FAQ: Which Material is Used to Manufacture a Fluid End?
In the past decades of fracking, fluid ends were manufactured using carbon steel, but since the year 2010, stainless steel made fluid end has been taking the market, especially the US. We are witnessing the other markets including Russia, Middle East and Indian are also switching to stainless steel now.
TianyuMfg was the first Chinese Manufacturer to fabricate stainless steel made fluid ends. At present, Over 80% of our fluid ends are stainless steel made for West Texas and Russian oilfields.
FAQ: Which Frac Fluid End Pump is Better Carbon Steel or Stainless Steel?
The usual lifetime of a frac carbon steel made fluid end is 450 to 500 hours, due to high pressure and abrasion. Stainless steel made fluid end can provide you with no less than 800 hours and some can last as long as 3000 pumping hours.
Contact TianyuMfg sales to check out our quality warranty of the fluid ends.
FAQ: What is the Price of Fluid End?
The price of the fluid end depends on many factors, including which material you prefer to choose, whether fully dressed or just block, triplex or quintuplex, plunger size and what your maximum working pressure is.
Contact TianyuMfg sales to check out our best prices for you.
FAQ: How Many Times Fluid Ends for Fracking need to Be Replaced Annually?
Depending on the pressure if proppant and the conditions at the fracking site, a fluid ends for fracking needs to be replaced at least 3 to 4 times annually.
FAQ: Can You use a Frac Pump Fluid End for Coil Tubing?
Yes, you can use a frac pump fluid end for coil tubing.
FAQ: What is a Triplex and Quintuplex of Fluid End Frac Pump?
A triplex fluid end frac pump has three pressure plungers and quintuplex fluid end frac pump has five pressure plungers which help to increase the pressure of the fluid.
TianyuMfg manufactures and supplies triplex fluid ends including TWS600, TWS2000/2250, and quintuplex fluid ends such as QWS1000, QWS2500, QWS2800 for your fracking business, all 100% interchangeable with dominant pump models in the oilfields.
Note: Manufacturers’ names or trademarks used on this website are for identification purposes only. TianyuMfg is not affiliated with these companies.