The largest manufacturer of stainless steel fluid ends since 2004, 52″ quints and 60″ quints stainless steel fluid ends are AVAILABLE IN TEXAS WAREHOUSE. Completely compatible with most frac pump power ends.

Su socio fabricante de terminales de fluidos de bombas de fracturación

Tianyu fabrica una línea completa de terminales de fluidos para bombas de fracturación, incluyendo terminales de fluidos para bombas de émbolo triplex y terminales de fluidos para bombas quintuplex.
Suministramos bloques de terminales de fluidos y ensamblaje de terminales de fluidos.

Van desde 600hp hasta 2500hp y están disponibles tanto en acero al carbono como en acero inoxidable 17-4ph o 15-5ph. Todos estos terminales de fluidos para fracking son 100% intercambiables con las marcas de bombas originales. Nuestros clientes han estado probando y utilizando nuestros terminales de fluidos durante más de doce años en los yacimientos petrolíferos de EE.UU., se ha demostrado que son completamente equivalentes o incluso superan el rendimiento y la durabilidad de las marcas originales, especialmente los terminales de fluidos de acero inoxidable TianyuMfg

Terminales de fluidos de bombas de fracturación TianyuMfg

Los terminales de fluidos que fabricamos son:

TWS600 FLUID END

Terminal de fluidos TWS600

TWS2250 FLUID END

Bomba TWS2250

QWS1000 FLUID END

Terminal de fluidos QWS1000

QWS2500 FLUID END

Terminal de fluidos QWS2500

QWS2800 FLUID END

QWS2800 Extremo del fluido

HT400 fluid end- three section fluid end

Extremo fluido HT400&HQ2000

Extremo de fluido de quintas tipo Y

Extremo de fluido de quintas tipo Y

WQ2700 fluid end

FMC STYLE WQ2700 extremo del fluido

FMC 2400HP three plunger fluid end

FMC STYLE Triplex 2400hp extremo fluido

JMAC STYLE 2510HP quints extremo del fluido

GD STYLE 2500T/2500Q extremo del fluido

GD STYLE Dowell PG-05 extremo del fluido

Cómo controlamos la calidad

iso

Material de calidad certificada

Toda la materia prima que TianyuMfg utiliza es refundida bajo escoria electroconductora (ESR), esto asegura la pureza del metal y obtiene una estructura metalográfica y composición química uniforme, aumentando significativamente la vida útil de su terminal de fluidos mientras se reducen las fallas y grietas.

inspection

100% Inspección

TianyuMfg tiene su propio tratamiento térmico con 4 hornos y piscina de enfriamiento junto con la instalación de refrigeración y sala de control para asegurar que todos los terminales de fluidos sean procesados con el mejor tratamiento térmico necesario.

doc

Paquete completo de documentos de calidad

Cada terminal de fluidos tiene su número de seguimiento de trazabilidad único desde sus piezas brutas de forja. Se proporcionará un paquete completo de documentos de calidad después de una inspección exhaustiva antes de la entrega.

warranty

Garantía de calidad

TianyuMfg ofrece una garantía de calidad líder en el mercado para los terminales de fluidos que fabricamos. Se proporcionarán reemplazos rápidos y sin costo en caso de cualquier falla ocurrida durante el período de garantía.

Póngase en contacto con TianyuMfg para
obtener un presupuesto rápido

extremos fluidos

Fluid end is a component use in fracking operations, all around the world. During the last century fracking industry has grown exponentially and the demand for Fluid End has also increased accordingly.

Fluid End, is one of the most essential component of a fracking apparatus. To understand what its function is, we have to first become cognizant of how the fracking process works, oil and gas is extracted from fracking by injecting a prop pant mixture into the hydrocarbon seam in the bowel of earth, under extremely high pressure. The prop pant flows into the nooks and crannies of the seam and cracks it due to its enormous pressure.

The cracks help with the extraction of hydrocarbons, which are sucked up. The component which is basically the gist of this endeavor is the fluid end. Fluid End is the component which endures the most pressure, abrasion and corrosion in the entire fracking apparatus, so it’s necessary to manufacture a Fluid End, which is robust, hard and sturdy to withstand these extreme conditions.

If you are running the oil & gas service business, this guide will be of great help to have a vast understanding of frac pump fluid end.

Which Material is Used to Manufacture a Fluid End?

Which Frac Fluid End Pump is Better Carbon Steel or Stainless Steel?

What is the Usual Life Time of a Frac Fluid End?

What is the Price of Fluid End?

How Many Times Fluid Ends for Fracking need to Be Replaced Annually?

Can You use a Frac Pump Fluid End for Coil Tubing?

What is a Triplex and Quintuplex of Fluid End Frac Pump?

FAQ: Which Material is Used to Manufacture a Fluid End?

In the past decades of fracking, fluid ends were manufactured using carbon steel, but since the year 2010, stainless steel made fluid end has been taking the market, especially the US. We are witnessing the other markets including Russia, Middle East and Indian are also switching to stainless steel now.

TianyuMfg was the first Chinese Manufacturer to fabricate stainless steel made fluid ends. At present, Over 80% of our fluid ends are stainless steel made for West Texas and Russian oilfields.

FAQ: Which Frac Fluid End Pump is Better Carbon Steel or Stainless Steel?

The usual lifetime of a frac carbon steel made fluid end is 450 to 500 hours, due to high pressure and abrasion. Stainless steel made fluid end can provide you with no less than 800 hours and some can last as long as 3000 pumping hours.

Contact TianyuMfg sales to check out our quality warranty of the fluid ends.

FAQ: What is the Price of Fluid End?

The price of the fluid end depends on many factors, including which material you prefer to choose, whether fully dressed or just block, triplex or quintuplex, plunger size and what your maximum working pressure is.

Contact TianyuMfg sales to check out our best prices for you.

FAQ: How Many Times Fluid Ends for Fracking need to Be Replaced Annually?

Depending on the pressure if proppant and the conditions at the fracking site, a fluid ends for fracking needs to be replaced at least 3 to 4 times annually.

FAQ: Can You use a Frac Pump Fluid End for Coil Tubing?

Yes, you can use a frac pump fluid end for coil tubing.

FAQ: What is a Triplex and Quintuplex of Fluid End Frac Pump?

A triplex fluid end frac pump has three pressure plungers and quintuplex fluid end frac pump has five pressure plungers which help to increase the pressure of the fluid.

TianyuMfg manufactures and supplies triplex fluid ends including TWS600, TWS2000/2250, and quintuplex fluid ends such as QWS1000, QWS2500, QWS2800 for your fracking business, all 100% interchangeable with dominant pump models in the oilfields.

Note: Manufacturers’ names or trademarks used on this website are for identification purposes only. TianyuMfg is not affiliated with these companies.

Obtenga un presupuesto rápido

Send Your Inquiry







This will close in 0 seconds

es_ESES